Rust-Oleum paint technique kits
We used three different Rust-Oleum paint technique kits to give decor accessories a completely new look. In this project we use Rust-Oleum Classic Leather Kit on an old steel trunk.
YOU WILL NEED:
Rust-Oleum Classic Leather Kit
The kit comes complete with everything you need for the project other than a dropcloth and something to paint!
CONTINUES BELOW
HERE'S HOW:
1. Start by cleaning the project to be painted. You don't want any dirt or flaky paint to spoil the finished result.
2. Place the project on a dropcloth and be sure to protect the surrounding areas from over-spray.
3. Shake the can well for at least a minute to ensure that the contents of the tin are mixed.
4. Spray on the base coat, working from left to right in even strokes and spraying from a distance of 30cm away from the surface to be painted. Let this coat dry for about an hour. You shouldn't need to apply a second coat, but you can if it's necessary.
5. Shake the top coat. Some of these tins have been sitting on the shelf for quite a while so be sure that it is well mixed before you apply.
6. Use the supplied sponge applicator to stroke on the top coat - working in small areas - and immediately start dabbing with the plastic sheet - all scrunched up. Dab the crinkled sheet all over the area that you have just painted to create the leather effect.
Don't worry if it doesn't look like leather at this stage - it will when you finish!
Finishing
On the handles I used rich gold and black Guilder's paste for a decorative touch. You can also use craft acrylic paint to create the same effect.
The next phase will be to add leather straps and buckles to the steel trunk to complete the look.